Water Hammer Arrestor 3/4" BSP Thread

Price:
Sale price$98.99
American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa filteroo

Water Hammer Arrestor 3/4" BSP Thread

Operating Pressure: Designed to operate on all domestic and commercial lines at 140psi working pressure.

Systems which exceed 60spi shall be installed with a pressure reducing valve upstream of the unit.

Thread Size: 3/4"

Temperature Range: 33*F to 180*F

Standards: A.S.S.E. 1010 Approved, ANSI A112.26.1M Approved, P.D.I. WH201 Approved & Certified

Water hammer is a pressure surge or wave caused when a fluid (usually a liquid but sometimes also a gas) in motion is forced to stop or change direction suddenly (momentum change). Water hammer commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe.

This pressure wave can cause major problems, from noise and vibration to pipe collapse. This water hammer arrestor device is designed to prevent the impact that this has on water pipes and also water filters or housings that may also be present on the line.

This device could potentially save you thousands of dollars in damage if you are not at home when leaks in damaged pipes occour and in alot of cases landlords or homeowners/insurance people do not look favourably at houses that have taken no precautionary measures in protecting their home.

Installation

May be installed in new or existing plumbing systems with a standar pipe tee veritcally, horizontally or at any angle. It is best to be installed at a location nearest the point that there seems to be a signifigant problem

Installation Instructions: 
1. Install as close to the shock source as possible.
2. Install a shock arrestor on both hot and cold lines.
3. Best Results are obtained when installed as shown in figure 1 and figure 2. They can be installed in concealed locations without access pannels

The My Water Filter® Difference

We love our products and what we do so below are just some of the things we do to make a difference.

We Give Together

When you buy a water filter or home water solution from My Water Filter®, at no extra cost to you, we give life changing drinking water to people in need on your behalf.

Bit by bit we make a difference together. Check out our giving page here.

“We also deliver our products for FREE and you get a 30-day money back guarantee. The product comes with free insurance too!”

Free Delivery Australia Wide
Our 10 Guarantees
30 Day Money Back Guarantee
12 Months Life Span

Product ID 1146

Water Hammer Arrestor 3/4" BSP Thread

Operating Pressure: Designed to operate on all domestic and commercial lines at 140psi working pressure.

Systems which exceed 60spi shall be installed with a pressure reducing valve upstream of the unit.

Thread Size: 3/4"

Temperature Range: 33*F to 180*F

Standards: A.S.S.E. 1010 Approved, ANSI A112.26.1M Approved, P.D.I. WH201 Approved & Certified

Water hammer is a pressure surge or wave caused when a fluid (usually a liquid but sometimes also a gas) in motion is forced to stop or change direction suddenly (momentum change). Water hammer commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe.

This pressure wave can cause major problems, from noise and vibration to pipe collapse. This water hammer arrestor device is designed to prevent the impact that this has on water pipes and also water filters or housings that may also be present on the line.

This device could potentially save you thousands of dollars in damage if you are not at home when leaks in damaged pipes occour and in alot of cases landlords or homeowners/insurance people do not look favourably at houses that have taken no precautionary measures in protecting their home.

Installation

May be installed in new or existing plumbing systems with a standar pipe tee veritcally, horizontally or at any angle. It is best to be installed at a location nearest the point that there seems to be a signifigant problem

Installation Instructions: 
1. Install as close to the shock source as possible.
2. Install a shock arrestor on both hot and cold lines.
3. Best Results are obtained when installed as shown in figure 1 and figure 2. They can be installed in concealed locations without access pannels

The My Water Filter® Difference

We love our products and what we do so below are just some of the things we do to make a difference.

We Give Together

When you buy a water filter or home water solution from My Water Filter®, at no extra cost to you, we give life changing drinking water to people in need on your behalf.

Bit by bit we make a difference together. Check out our giving page here.

“We also deliver our products for FREE and you get a 30-day money back guarantee. The product comes with free insurance too!”

Free Delivery Australia Wide
Our 10 Guarantees
30 Day Money Back Guarantee
12 Months Life Span

Product ID 1146