How to Add Alkaline Water to Any Water Filter

It's pretty amazing how much water quality can impact our health, right? A lot of us are always looking for ways to make our drinking water even better. One really clever idea that's popped up is adding alkaline water to our existing filtration systems. This blog post is all about how you can easily install a dual alkaline tap onto your current water filter, giving you both standard filtered water and alkaline water straight from your kitchen sink!

Although it might seem complicated, the process is relatively simple, with huge potential benefits for your health. To enjoy those benefits, though, it's important to ensure proper installation, as following the right steps is essential to maximising and getting the best results.

Before anything else, let's discuss what alkaline water is. It's essentially water that has a higher pH level than your typical tap water. Most standard drinking water is between a pH of 7 to 7.5, but alkaline water typically measures between 8 and 9. Some people reckon this higher alkalinity offers all sorts of health benefits, like better hydration and helping to neutralise acid in your body. For families, especially those with little kids, having both kinds of water on hand for different needs can be really beneficial.

The dual alkaline tap system was made to keep up with the demand for both filtered and alkaline water. With this setup, you can easily switch between your standard filtered water and alkaline water for a convenient and versatile drinking experience.

Now, let's go through how the system works so you can get it properly installed in your own kitchen. Before you get started, make sure you take note of your specific plumbing setup. While the installation process is easy and straightforward, you might run into problems based on the pipes you have. Because of that, it's probably a good idea to have a chat with a professional before you dive in.

The dual alkaline tap system is made up of several components, and its effectiveness really depends on how well they all work together. This system, while pretty sophisticated, really relies on each part doing its job. 

All the parts and components are designed to fit seamlessly, but any mistake can create bigger problems. As such, it's important to be familiar with these components to ensure optimal performance.

• Dual Tap: This is your new tap, with two handles to control the different water types.
• Alkaliser Cartridges: These are the parts that increase the water's pH.
• T-Piece Connector: This connector lets you split the water, sending some to the alkaliser before it hits the tap.
• Hoses and Connections: These are all the necessary plumbing components to ensure everything is hooked up properly.

Putting in the dual alkaline tap system is a pretty straightforward process. Here's how you can do it, but first, make sure you've got all your tools ready. Even though the instructions are clear, some steps might feel a bit confusing, especially if you're new to plumbing.

First things first, turn off the water supply to your existing water filter. Then, you'll need to remove your old tap. This usually means unscrewing the nuts from underneath the sink and pulling the tap out. It's a good idea to hang onto these things, just in case you need them for the new setup.

Once the old tap is out, you can simply slide your brand-new dual tap into the same hole in the sink. Secure it from underneath by tightening up the nuts. This tap will have two handles, giving you separate control over the flow of standard and alkaline water. Just be careful here, as an improper installation could lead to leaks.

Now, find the T-piece connector that came in your kit. You'll attach this to the water line coming from your existing water filter. The T-piece is what allows the water to split, sending some through the alkaliser and the rest straight to the tap.

Next up, connect the alkaliser cartridge to that T-piece. Make sure all the hoses are secured really tightly. The water that flows through this alkaliser will be transformed into alkaline water with a lovely pH of 8 to 9. This step is super important because it's how you get that enhanced water quality.

Once everything is connected, turn your water supply back on. Test both sides of the tap to make sure both the standard filtered water and the alkaline water are flowing just right. You should now have beautiful filtered water from one side and alkalised water from the other.

Bringing alkaline water into your home can offer a bunch of benefits. However, it's good to think about any potential downsides too. For instance, some people might not be keen on the taste, but you can often tweak that with different additives.

A lot of people swear by enhanced hydration from alkaline water, although scientific studies haven't quite landed on a firm conclusion yet. Your body also naturally keeps its pH levels in check, so whether alkaline water is truly necessary is a bit of a debate. Still, those who are big fans often mention better digestion and a boost in energy.

Here are the other benefits that people who drink alkaline water claim to have experienced:

• Better Hydration: Many believe alkaline water is more easily absorbed by your body, which could mean better hydration.
• Tastes Nicer: Loads of people find alkaline water has a smoother, more pleasant taste, making it easier to drink more throughout the day.
• Potential Health Benefits: While the scientific jury is still out, some people claim alkaline water can help neutralise acid in the body and support overall health.

Before you completely switch to alkaline water, here are a few things to consider: firstly, it might be good for your health; however, some studies show mixed results. Even though plenty of people champion its advantages, there are also doubters who question how effective it really is. This is pretty important because, while alkaline water could help with hydration, it's not a miracle cure. 

Also, you should definitely consult a healthcare professional before making any big changes to your diet, but ultimately, the decision is yours. Here are some helpful tips before making the big jump:

• Chat with a Healthcare Professional: If you've got any existing health conditions, it's always a good idea to have a chat with your doctor before making significant changes to your water intake.
• Balance is Key: While alkaline water can be helpful, it's crucial to keep a balanced diet and not rely solely on alkaline water for all your health improvements.

Adding a dual alkaline tap to your existing water filter system is a fantastic way to upgrade your family's water supply. With a simple installation and the ability to give you both standard and alkaline water, this system truly caters to all sorts of hydration needs.

While understanding the pros and cons of alkaline water is super important, it lets you make smart choices that can really benefit your family's health and well-being. Some might grumble about the cost, but the long-term advantages often far outweigh that concern.

If you're keen to upgrade your water filter system, you might want to check out the ULTRAPURE Aragon 10" Triple Under Sink Water Filter System with Fluoride Removal & Alkaline for excellent filtration.

Enjoy that refreshing taste and all the potential health benefits that come with alkaline water, straight from your tap!

If you have any questions or need assistance, please contact us. We'd be delighted to help.